Lister Star Shaver with Storage Bag – Green

Sale price €345,82Regular price
Regular price €345,82
Tax included. Shipping calculated at checkout.
SKU: 641122000945
1 product in stock
Lister Star Scheermachine met Opbergtas – Groen Scheermachines - Maddelin Equestrian Lister
Lister Star Shaver with Storage Bag – Green
Sale price €345,82Regular price
Regular price €345,82

🌍 Worldwide shipping. Returns are possible within the EU, within 14 days of receiving your order.

Manufacturer
Lister GmbH
Am Mühlenberg 3
58509 Lüdenscheid
Duitsland
info@lister.de

Product Information

The Lister Star is a mains-powered clipper for full body clipping of horses and cattle. At 45 watts and a weight of 750 grams it stays light in the hand, even when you are taking off a full winter coat. It comes with A2F/AC blades, clipper oil, a filter, a brush and a storage bag, so you can get started straight away.

About this clipper

The Star is a classic working clipper for anyone who clips one or more horses themselves. It runs on mains power, so you need a socket, but you never lose time to a battery going flat halfway through a clip. The motor is air-cooled, which limits heat build-up during longer sessions.

At 750 grams the Star is one of the lighter mains-powered clippers. You notice that mainly in your wrist and shoulder when you work under the belly, down the legs or high up against the withers. The less weight you have to steer, the more calmly you can run the clipper over the body and the more even the result.

The Star works with screw-on blades from the Lister A series. These are two separate blades that you screw on: the bottom blade is the fixed comb that lies against the skin and sets the cutting height, the top blade moves back and forth. As standard you get the A2F/AC Fine, which clips at 1.4 mm. That is the classic choice for finishing a horse short and tight.

The whole A series fits the Star and also the Fusion, Eclipse, Liberty and Legend. That lets you pick the cutting height for each job: the A2/AC Medium at 2.5 mm leaves more coat, the CA2/AC Coarse gives the same 2.5 mm but with 18 teeth for a dirty or muddy coat, and the Covercote with 24 teeth at 5.0 mm is meant for a longer coat. Want to go shorter instead? There is the A2C/AC Close at 1.2 mm, the A2S/AC Surgical at 1.0 mm and the A2SS/AC Super Surgical at 0.5 mm.

Lister does not state the speed, noise level or cable length for the Star. If you definitely want a particularly quiet clipper, you are better off looking at a model for which that figure is given.

Lubricate the blades before you start, in between and again after clipping. Oil keeps the blades cool and that is the main reason a blade set stays sharp for a long time. Brush the hair out from between the teeth after every clip and keep the filter clean, because a blocked filter restricts the air cooling of the motor.

Always clip a dry, clean coat. Sand and mud blunt blades faster than hair does. Have your blades gone blunt? You can have them sharpened by us; hand them in properly cleaned, because dirty blades cost extra. A second blade set in a different cutting height is handy if you want to finish short as well as take off a thick winter coat.

Choose the Star if you clip at home or in the yard near a socket and want a light, straightforward clipper for doing a whole horse. It suits private horse owners, livery yards and anyone who clips a few animals per season.

If you often work in places without electricity, out in the field or at clients' yards, a cordless clipper from our range makes more sense. If you want to tidy up the head, legs or ears rather than a whole body, a small trimmer is the better choice.

Oil the blades before you start, during clipping and again afterwards; the set includes 60 ml of R15 oil, a filter and a brush. Always clip a dry, clean coat, because sand and mud blunt the blades faster than hair does.

After every clip, brush the hair out from between the teeth and keep the filter clean: a blocked filter limits the air cooling of the motor. Store the clipper, blades and accessories together in the storage bag supplied.

Lister

Lister is een Brits merk dat wereldwijd bekendstaat om zijn professionele scheermachines voor dieren, waaronder paarden. Het merk heeft meer dan een eeuw ervaring in het ontwikkelen van krachtige en betrouwbare tondeuses.

Lister-scheerapparaten worden ontworpen met sterke motoren, precisiegeslepen messen en duurzame materialen, waardoor ze geschikt zijn voor intensief gebruik tijdens het scheren van paarden. Dankzij hun ergonomisch ontwerp en goede balans zijn ze comfortabel te gebruiken, zelfs bij langere scheerbeurten.

Door de combinatie van Brits vakmanschap, krachtige prestaties en lange levensduur zijn Lister-tondeuses een populaire keuze bij ruiters, groomers en professionele stallen die hun paarden efficiënt en nauwkeurig willen scheren.

Which blades or blade sets fit this clipper?
The Star works with screw-on blades from the Lister A series. Those same blades also fit the Fusion, Eclipse, Liberty and Legend. Snap-on blade sets do not fit this clipper.

Which blades are included as standard?
The A2F/AC Fine, with a cutting height of 1.4 mm. It lets you finish a horse short and tight.

Which cutting height do I choose for a dirty winter coat?
For a dirty or muddy coat the CA2/AC Coarse is the one: 2.5 mm with 18 teeth, set further apart.

How much does the clipper weigh?
750 grams.

Does the Star run on a battery?
No, the Star runs on mains power. So you need a socket and possibly an extension lead.

How quiet is this clipper?
Lister does not state a noise level for the Star. That is why we do not quote a figure.

How do I maintain the clipper?
Lubricate the blades before, during and after clipping, brush the hair away and keep the filter clean. Have blunt blades sharpened rather than carrying on with them.

Can I clip cattle with it as well?
Yes, the Star is intended for horses and cattle. Do choose a blade set that suits the coat you are working on.

  • Mains-powered Lister clipper for horse and cattle
  • 45 W, 750 g, air-cooled motor
  • Works with Lister A series screw-on blades, from 0.5 to 5.0 mm
  • Supplied with A2F/AC blades at 1.4 mm
  • 60 ml R15 oil, filter, brush and storage bag included
  • The same blades also fit the Fusion, Eclipse, Liberty and Legend
  • Suitable for full clips near a socket
  • Speed, noise level and cable length are not stated
  • Understanding for every level
    From ambitious amateur to professional rider: at Maddelin you get advice that matches your goals.
  • Carefully selected top segment
    A carefully selected assortment of top brands for riders who only want the best.
  • Team of peer experts
    Not salesmen, but riders and professionals with practical experience. Advice from people who truly know the equestrian world.
  • Over 30 years of extensive expertise
    From show jumping and dressage to horsemanship and breeding: at Maddelin, we speak from experience, not from theory.

Related products

Recently viewed

  • Product label: NEW
  • Product label: SALE
  • Product label: TOP
  • Product label: NEW
  • Product label: SALE
  • Product label: TOP
  • Product label: NEW
  • Product label: SALE
  • Product label: TOP
  • Product label: NEW
  • Product label: SALE
  • Product label: TOP