Kask
Kask Star Lady Hunter Black Crystals Frame Black Riding Helmet
Incl. VAT, excl. shipping
On this Kask Star Lady Hunter in Black, the frame around the shell is set with crystals, in the Crystals Frame Black build from the Kask configurator. The shell itself stays matt, in the Hunter fabric covering. So you combine the wide peak and understated base of the Hunter with an edge that sparkles. Shell size 57/59, with a free liner in your size.
Product details
In short
- Kask Star Lady Hunter Black with crystals in the frame
- Matt fabric shell, wide peak
- ABS, EPS in three densities, merino liner
- 57/59 shell with a free liner in your size
- Standards: label under the liner
Description
On this Kask Star Lady Hunter in Black, the frame around the shell is set with crystals, in the Crystals Frame Black build from the Kask configurator. The shell itself stays matt, in the Hunter fabric covering. So you combine the wide peak and understated base of the Hunter with an edge that sparkles. Shell size 57/59, with a free liner in your size.
About this riding helmet
Crystals in the frame. The frame is the edge that runs around the shell of a Kask helmet. On the standard Star Lady Hunter, that edge is covered in the same matt fabric as the shell. On this configurator build, the frame is set with crystals, in the colour Black. The shell keeps the Hunter finish: matt Prestige fabric, a hard-wearing textile. So it is not a glossy shell; you will find that in the Pure Shine line. Kask publishes no technical data on the crystal frame itself.
How the Star Lady is built. According to Kask, the Star Lady is a wide-peak variant of the Dogma. The outer shell is ABS; inside is expanded polystyrene in three densities. According to Kask, two honeycomb grilles provide a constant airflow. The liner is 100% merino wool and removable, the chin strap faux leather. At the back sits the patented Fit System, which settles against the back of the head by itself. Kask gives 580 g for the standard Star Lady Hunter, but no weight for a crystal build.
Size. This is shell size 57/59. Within it you choose the liner that matches your head circumference, 57, 58 or 59 cm, and it comes free with the helmet. If you measure smaller or larger, the standard Kask Star Lady Hunter also comes in other shell sizes.
Standards. KASK certifies its current production of the Star Lady to EN 1384:2023 and ASTM F1163-23 (with the SEI label). The standards of your helmet are shown on the label under the liner; a helmet from an older production run may carry an older standard. KASK also tests its helmets to its own rotational impact protocol, the Rotational Impact WG11 Test. This is an internal KASK protocol, not a standard.
Key benefits
- Frame set with crystals, shell in matt fabric
- The wide Star Lady peak
- Free liner of 57, 58 or 59 cm
- Removable merino wool liner
- Kask Fit System at the back
When to choose this product
Who is it for?
For riders with a head circumference of 57 to 59 cm who want a black, matt Star Lady with a crystal edge.
Discipline
Kask lists the Star Lady for dressage and show jumping.
When should you choose something else?
If you would rather have no crystals: the Kask Star Lady Hunter. If you want the crystals in the ventilation grilles: the Kask Star Lady Hunter In-Out Black/Graphite or the Kask Star Lady Hunter Black Vibe Black/Graphite Mix. The same helmet in navy: the Kask Star Lady Hunter Navy Crystals Frame Navy.
Fit
This helmet has shell size 57/59. You set your size with the liner: choose 57, 58 or 59 cm, according to your head circumference. That liner comes free with the helmet, and you can get an extra one as the Kask Dogma WG11 liner.
Kask states that the helmet must fit precisely. So preferably come and try it on in the shop in Torhout: the shape of your head counts too, and Maddelin can fine-tune the fit with fitting pads or the Kask lateral sticker set.
Technical details
- Base: Kask Star Lady Hunter in Black, configurator build
- Frame: Crystals Frame Black, set with crystals
- Shell: ABS with matt Prestige fabric
- Peak: wide peak
- Inner shell: EPS in three densities, two honeycomb grilles
- Liner: 100% merino wool, washable
- Chin strap: faux leather
- Fit System: yes
- Shell size: 57/59, liner of your choice in 57, 58 or 59 cm
- Weight: no Kask data for this build (standard Star Lady Hunter: 580 g)
- Standards: see the label under the liner
| Brand | Kask |
|---|---|
| Season | 2026 |
| Colour | Black |
| Age group | Volwassenen |
| Size | M (57-59) |
Expert advice
The crystal frame calls for a gentle hand when cleaning. For the whole helmet, Kask specifies water, neutral soap and a soft, clean cloth, and no chemical products or solvents. Then let the helmet dry at room temperature.
Store the helmet in its original box or in the Kask helmet bag, out of the sun and away from heat. Do not put it loose in a bag among other kit.
Use & care
- Click the liner in your size into the helmet (three pins).
- Put the helmet on and fasten the chin strap firmly.
- Keep the label under the liner in the helmet.
- Clean shell and frame with water, neutral soap and a soft cloth; do not rub the crystals.
- Wash the liner by hand in cold water or in the machine at 30 °C.
- Replace the helmet after a heavy fall or impact.
Frequently asked questions
Is the shell of this helmet glossy?
No. The shell has the matt fabric Hunter finish. Only the frame around it is set with crystals.
What is the frame of a helmet?
The edge that runs around the shell. On the standard Hunter it is covered in fabric; on this build it carries crystals.
How do I choose the right size?
Measure your head circumference just above your eyebrows and ears. If it is between 57 and 59 cm, choose the liner in that size; it comes free with the helmet.
Which standards does this Star Lady have?
KASK certifies its current production of the Star Lady to EN 1384:2023 and ASTM F1163-23 (with the SEI label). The standards this helmet carries are on the label under the liner; an older production run may carry an older standard.
What should I know for FEI competitions?
If you ride at FEI level, check the label: from 1 January 2027 the FEI accepts VG1 only in combination with one of the main standards, and from 1 January 2028 the FEI requires at least two accepted standards. EN 1384:2023 and ASTM F1163:23 are both on the FEI list. Rules differ by federation, discipline, level and country and change regularly: check your federation's current rules.
Can I wear this helmet in dressage?
FEI dressage and eventing dressage ask for black or a dark colour; Paardensport Vlaanderen for a discreet colour. Rules differ by federation, discipline, level and country and change regularly: check your federation's current rules.
After how many years should a helmet be replaced?
Kask says 10 years after the production date, the FEI every 3 to 5 years. After a heavy fall or impact, replace it straight away, even without visible damage.
- Manufacturer & EU responsible person
- KASK S.p.A.Via Variante di Cicola 6/E, 24060 Carobbio degli Angeli (BG), Italiëhttps://www.kask.com/en-us/contactus