Clip 'N Care Scheermachine Olie

Sale price €8,50Regular price
Regular price €8,50
Tax included. Shipping calculated at checkout.
Maat:
SKU: 809016
3 products in stock
Clip 'N Care Scheermachine Olie Scheermachines - Maddelin Equestrian
Clip 'N Care Scheermachine Olie
Sale price €8,50Regular price
Regular price €8,50

🌍 Worldwide shipping. Returns are possible within the EU, within 14 days of receiving your order.

Manufacturer
Clip 'N Care B.V.
Thomas Edisonweg 36
5151 DJ Drunen
Nederland
info@clipncare.nl

Product Information

The Clip 'N Care clipper oil is an acid-free mineral oil for lubricating clipper blades, blade sets and the moving parts inside them. You apply a few drops regularly while clipping, so that the blades never run dry. The oil suits all types of clippers and is part of the basic kit for anyone who clips or trims their own horses.

About this maintenance product

In every blade set two cutting surfaces move continuously against each other: the fixed bottom blade against the skin and the top blade that travels back and forth. That friction is exactly where a blade set wears. A thin film of oil between the two surfaces keeps the movement smooth and limits the heat it creates.

Oiling is therefore not an end-of-season job but something you do while clipping. Clip 'N Care advises applying a few drops to the blades each time while you are working. If you wait until the blades feel noticeably dry or hot, the set has already given up some of its sharpness.

Regular, timely oiling helps prevent overheating and premature wear of the blades and the machine. That matters most on long sessions, for example when you clip a horse out fully and the machine runs for half an hour or more at a stretch.

You can also use the oil on moving parts inside the blade set itself, as far as the manufacturer of your clipper prescribes it. Every machine differs on this point, so always check the manual first to see which parts may be oiled and which may not.

Note the difference from a cleaning or cooling spray. This oil is there for lubrication. Clearing hair and dirt from between the teeth, or cooling the blades as you go, is the job of another product; the two complement each other and do not replace each other.

Work in three moments: a few drops before you start, in between each time you pause or move to another part of the body, and again after clipping before you put the machine away. Let the machine run briefly after applying, so the oil spreads across the full width of the blades, and wipe away the excess with a cloth. That way no oil is left behind on the coat.

Brush the hair out from between the teeth first and oil afterwards, otherwise you work dirt into the blade set. Always clip a dry, clean coat: sand and mud blunt blades faster than hair does. If your blades have gone blunt despite good maintenance, you can have them sharpened with us. Do hand them in properly cleaned, because dirty blades cost extra.

Clipper oil is not a choice but a necessity the moment you have a clipper in the house. You need it if you clip one or more horses at home, and certainly if you clip day after day professionally. Because the oil suits all types of machines, it makes no difference whether you work with screw-on blades or with snap-on blade sets.

If you are looking for something to blow hair and dirt away while clipping or to cool the blades as you go, you need a cleaning or cooling product instead of, or alongside, this oil. Do ask us which product suits your machine.

Oil at three moments: a few drops before you start, in between whenever you pause or move to another part of the body, and after clipping. Brush the hair out from between the teeth first, or you will work dirt in. Let the clipper run briefly and wipe off the excess, so no oil stays on the coat.

The oil lubricates, but does not clean or cool. Keep the bottle dry and closed.

Clip 'N Care

Goed materiaal verdient goed onderhoud.

Clip ’N Care biedt praktische onderhoudsproducten voor scheermachines, tondeuses en scheermessen. Ideaal voor ruiters en grooms die hun materiaal intensief gebruiken en hun messen zo lang mogelijk scherp, schoon en soepel willen houden.

Het assortiment is ontwikkeld rond het reinigen, koelen, smeren en onderhouden van scheermessen. Zeker tijdens het scheren van paarden, wanneer een machine langere tijd draait en de messen warm worden, maakt goed onderhoud een duidelijk verschil.

Van Blade Care voor een grondige verzorging van je scheermessen tot verkoelende onderhoudssprays: Clip ’N Care maakt het onderhoud eenvoudig en efficiënt.

Waarom Clip ’N Care?

- Voor professioneel onderhoud van scheermessen en tondeuses
- Helpt messen schoon en soepel te houden
- Praktisch tijdens én na het scheren
- Geschikt voor regelmatig en intensief gebruik
- Een kleine stap in je groomingroutine die de levensduur van je materiaal helpt verlengen

Will this oil work with my clipper?
Yes. The oil is suitable for all types of clippers, with screw-on blades as well as with snap-on blade sets. If you are unsure about a specific model, feel free to get in touch with us.

How often should I oil?
Before clipping, regularly during clipping and once more afterwards. On a full clip you easily get to several times per session.

How much oil do I apply?
A few drops across the width of the blades is enough. Then let the machine run briefly and wipe away the excess.

Why does oiling matter so much?
The top blade and bottom blade move continuously against each other. Without lubrication they run dry, heat up and lose their sharpness faster.

Can I lubricate the machine itself with this?
Only the moving parts in the blade set, and only if the manufacturer of your clipper prescribes it. Check the manual for that.

Is this the same as a cooling or cleaning spray?
No. This oil provides lubrication. Cleaning and cooling are separate functions for which another product exists.

What is the oil made of?
Acid-free mineral oil.

How much is in the bottle?
250 ml.

  • Acid-free mineral oil from Clip 'N Care for clipper blades and blade sets
  • Lubricates the moving cutting surfaces and so limits heat and wear
  • Suitable for all types of clippers, whatever the brand or blade system
  • A few drops before, during and after every clip
  • Also for moving parts in the blade set, if the manual prescribes it
  • 250 ml bottle to keep with the machine
  • It lubricates, but does not clean or cool: there is a separate product for that
  • Understanding for every level
    From ambitious amateur to professional rider: at Maddelin you get advice that matches your goals.
  • Carefully selected top segment
    A carefully selected assortment of top brands for riders who only want the best.
  • Team of peer experts
    Not salesmen, but riders and professionals with practical experience. Advice from people who truly know the equestrian world.
  • Over 30 years of extensive expertise
    From show jumping and dressage to horsemanship and breeding: at Maddelin, we speak from experience, not from theory.

Related products

Recently viewed

  • Product label: NEW
  • Product label: SALE
  • Product label: TOP
  • Product label: NEW
  • Product label: SALE
  • Product label: TOP
  • Product label: NEW
  • Product label: SALE
  • Product label: TOP
  • Product label: NEW
  • Product label: SALE
  • Product label: TOP