Heiniger Shaver Head Care 3-in-1 Spray 300 ml

Use the spray regularly while you clip, not only once the blades are already hot or clogging up. Brush the loose hair away, aim the nozzle at the blade set while the machine is running, spray briefly and wipe off the excess. That keeps the blade set at temperature and keeps you moving.

After clipping, clean the blade set and treat it one last time before you store it; that keeps the blades running smoothly and counters corrosion. Blade sets looked after this way stay sharp for longer. If they do go blunt in the end, you can have them resharpened by our sharpening service, handed in properly cleaned.

Choose this spray if you want to stop as little as possible while clipping and would rather use one product than three. It is just as useful for a full clip as for tidying up an existing clip, and it works on snap-on blade sets as well as on screwed-on blade sets.

If you only want to lubricate, a classic clipper oil is enough, for instance the Heiniger Special oil in 100 ml or 500 ml. If you are mainly after strong cleaning and cooling and oil separately, the Wahl Blade Ice spray is a good alternative within our range.

Use the spray regularly while clipping, before the blades get hot or jam. Brush away loose hair, aim the nozzle at the blade set while the clipper is running, spray briefly and wipe off the excess. Always aim at the blade set, not at the coat.

Clean the blade set after clipping and treat it one last time. Also oil the blades separately before storing them, and follow your clipper's manual.

What exactly does a 3-in-1 spray do?
It lubricates the blades, cools them and cleans hair and dirt off them, all in the same action.

Does this replace my clipper oil?
The spray does lubricate, but how far that replaces separate oiling is not stated in the product information. Follow the manual of your clipper for that: the safest approach is to use the spray while you work and to oil the blades separately as well before you put them away.

How often do I use the spray?
Regularly while clipping, so before the blades get hot or clog up, and once more after cleaning.

Does this suit my clipper?
The spray is intended for blade sets and clipper blades of clippers and trimmers and is not limited to one particular type. If you work with a machine you are unsure about, feel free to get in touch.

Does it leave anything sticky on the coat?
According to the manufacturer the spray leaves no residue. Do always aim at the blade set and not at the coat, and wipe off the excess.

Can I use the spray while the machine is running?
Yes, that is what the targeted nozzle is made for. That way the treatment is a matter of seconds.

Does this help keep my blade sets sharp for longer?
A blade set that is kept clean, cool and lubricated wears more slowly. They do go blunt in the end, and then you can have them resharpened by our sharpening service.

• Maintenance spray from Heiniger that lubricates, cools and cleans
• Keeps blade sets running smoothly and at temperature while clipping
• Removes hair and dirt from between the teeth
• Leaves no residue on the coat
• Targeted nozzle, usable even while the machine is running
• Fresh scent without a sharp chemical smell
• Contents 300 ml
• Usable on snap-on blade sets and on screw-on blades